Jet / Wilton 7020M & 7040M Mitering Horizontal Band Saw 10" capacity
7020M Jet/Wilon 
Specifications
Specifications
| Height | 41 inch |
| Width | 31 inch |
| Length | 79 inch |
| Net Weight | 1134 pound |
| 7020M Motor | 1-1/2 HP, 115/230V, 1 Ph |
| 7040M Motor | 2 HP, 220V, 3PH |
| 7040M-4 Motor | 2 HP, 440V, 3PH |
| Cutting Capacity (in.) | 10 x 16 |
| Round at 90 Degrees (in.) | 10 |
| Round at 45 Degrees (in.) | 8-1/2 |
| Rectangle at 90 Degrees (in.) | 9 X 16 |
| Square at 90 Degrees (in.) | 10 |
| Blade Size (in.) | 1 X .035 X 135 |
| Blade Speeds (SFPM) | 100 - 350 |
10 Inch Mitering Saw
- Side blade guides eccentric shaft, ball bearing
- Variable speed drive system, fine tune the blade speed fast and easily
- 6 contact point blade adjustable guide assemblies
- Combined with the side bearings are carbide pads, the back of the blade rides on two load bearings mounted on a pivot shaft so both bearings share the load equally
- Mitering head - the workpiece remains fixed while the head swivels to cut any angle 0° - 45°
- Heavy duty transmission utilizes hardened and ground gears operating in an oil bath
- Counterbalanced feed system is controlled by a dual system of counterbalance springs working with a hydrauliuc cylinder.
- Swing away control panel
- Cast iron blade wheels
- Coolant system
- 1" Bi-metal blade
- Adjustablr material stop
- Transmission gears are tempered for durability
- Gears are lubrictated in oil bath for long life
- Hydraulic lift for saw head
- Special vise for easy setup
- Adjustable blade guides
- 26.25in worktable height
1-800-748-9068
Production Specialty
a dba of RGL Enterprises, Inc.
1601 North Harper Rd, Corinth, MS 38834
Tel: 662-287-6117 Fax: 662-287-1772
Home Horizontal Band Saws Cold Saws Drill Presses Vertical Band Saw Surface Grinders Lathes Vertical Mills New Cold Saw Blades Cold Saw Sharpening Prospector Lube Systems Accu-Lube Vendors Site Map Links Contact