Zip 28 - 30 TRAD301 Miter Cutting Band Saws
Zip 28 - 30 TRAD301 Miter Cutting Band Saws
Equipment |
Lubrication |
| Prospector
Lube Systems Accu-Lube Rustlick Lube USA |
Saw blades |
| New
Cold Saw Blades Cold Saw Sharpening Arntz Saw Blades Vendors Contact Us |
Overview
| Miter cut with swiveling saw head up 60° right |
| Heavy cast iron saw head assures stability |
| Features direct drive system |
| gravity down feed is variable using control valve |
| Operate in manual down feed, regulated or automatic down feed |
| Rapid acting vise incorporates hand wheel. |
| (Trad 300 will miter cut to 45° left) |
| Built in coolant system |
| safety shut-offs (door interlock - cut end - blade breakage |
| Blade tensioning is mechanical |
| Stable large base unit for low vibration |
| Stock stop - material supported by roller |
| Optional roller table for into and away from blade |
| model | TRAD 301 | TR 301 (420V)) | Zip 28 | Zip 30 | Zip 30 (420V) |
| Cutting width capacity at various degrees | |||||
| round 90 | 10" | 10" | 8.6" | 8.6" | 8.6" |
| round 45 right | 7.5" | 7.5" | 5.5" | 5.5" | 5.5" |
| round 60 right | 4.25" | 4.25" | 3.5" | 3.5" | 3.5" |
| rectangle 90 | 11.75" x 6.6" | 11.75" x 6.6" | 9.6" x 4.6" | 9.6" x 4.6" | 9.6" x 4.6" |
| rectangle 45 right | 7.5" x 6.6" | 7.5" x 6.6" | 5.5" x 5.5" | 5.5" x 5.5" | 5.5" x 5.5" |
| rectangle 60 right | 4.25" x 5 .8" | 4.25" x 5 .8" | 3.25" x 3.25" | 3.25" x 3.25" | 3.25" x 3.25" |
| square 90 | 9.75" | 9.75" | 7.12" | 7.12" | 7.12" |
| square 45 right | 7" | 7" | 5.5" | 5.5" | 5.5" |
| square 60 right | 4 1/3" | 4 1/3" | 3.25" | 3.25" | 3.25" |
| work table height | 37" | 37" | 37" | 38" | 38" |
| machine height | 76.75" | 76.75" | 70.75" | 72.75" | 72.75" |
| min. floor space required | 47.25" x 78.75" | 47.25" x 78.75" | 39.4" x 69" | 47.25" x 73" | 47.26 x 73" |
| unit weight | 970 lbs. | 970 lbs. | 440 lbs. | 661 lbs. | 661 lbs. |
| electricals | 220V 3ph | 420V 3ph | 110V 1ph | 220V 3ph | 420V 3 ph |
| max blade | 108.25"x1" | 108.25"x1" | 97.6x1" | 97.6x1" | 97.6x1" |
| max vise opening | 12" | 12" | 10" | 10" | 10" |
| motor | 1.3/2 | 1.3/2 | 2hp | 1.25hp | 1.25hp |
| blade speeds | 108 - 216 fpm | 108 -216 fpm | 295 fpm | 105 - 210 fpm | 105 - 210 fpm |
1-800-748-9068
Production Specialty
a dba of RGL Enterprises, Inc.
1601 North Harper Rd, Corinth, MS 38834
Tel: 662-287-6117 Fax: 662-287-1772
Home Horizontal Band Saws Cold Saws Drill Presses Vertical Band Saw Hydraulic Press Surface Grinders Lathes Vertical Mills New Cold Saw Blades Cold Saw Sharpening Prospector Lube Systems Accu-Lube Vendors Site Map Links Contact
Mitering Band Saws
