Ibarmia A-Series

Versatile Industrial Drill Press for
Drilling, Boring & Tapping
| Capacities | Up To Maximum | |
| Drilling | In Steel | 1.97" (50mm) |
| In Cast Iron | 2.36" (60mm) | |
| Boring | In Steel | 1.42" (110mm) |
| In Cast Iron | 1.65" (165mm) |
![]()
![]()
Features
- Automatic feed reversing system for tapping on “RS” models
- Automatic feed and cut-off by mechanical clutch
- Hardened and ground high quality steel gears
- Speed plate and selecting levers on front of head
- Gear box lubrication by automatic pump
- Machine base with 2 T-slots, coolant tank and pump
- Large rotating table with 3 T-slots
- Feed crank wheel for manual feed
- Front hand wheel for fine feed work
- Depth scale and adjustable depth stop
- Automatic tool ejector
- Work Light
- Built-in low voltage electrical equipment in machine head
- Emergency STOP
- Drill guard with microswitch
- Standard Motor 1800 RPM
| Model | Description |
| 1A35 | 29.1" (740mm) with Fixed Table |
| 1A35RS | 29.1" (740mm) with Fixed Table and Tapping |
| 1A40 | 29.5" (750mm) with Fixed Table |
| 1A40RS | 29.5" (750mm) with Fixed Table and Tapping |
| 1A45 | 29.1" (740mm) with Fixed Table |
| 1A45RS | 29.1" (740mm) with Fixed Table and Tapping |
| 1A50 | 29.1" (740mm) with Fixed Table |
| 1A50RS | 29.1" (740mm) with Fixed Table and Tapping |

