ArntzBand Saw Blades By Arntz

 

ArntzM42-Star
All purpose blade for small solid steel. Engineered for Non ferrous metals
Contour cutting operations. Superior because: Tooth tips of HSS M42 The standard tooth with 0 degrees respectively, slightly positive rake angle combined with a standard raker or wavy set is distinguished to cut short chipping materials and light wall thickness' for smooth and burr-free cuts.

Arntz M42-Star Plus the band for larger solid bars. Engineered for:Non ferrous metals Superior because: Tooth tips of HSS M42
The hook tooth with a positive rake angle combined with a raker-set, for easy tooth penetration and chip formation on larger cross sections. Cuts long chipping and tough materials without a problem. The STAR-PLUS Bi-metal band cuts smooth and accurate.

 

M42 SprintM42-Sprint The Structural-Professional For light and medium wall thickness'.Engineered for: Medium to low alloy steels Non ferrous structurals,Single and bundle cuts Tubes and structurals with light or medium walls Sheet metal on vertical band saw machines Superior because: - Tooth tips of HSS M42. - The variable tooth with 0 degree rake angle with a special group-set cuts even lightest sections with less vibration. - Short chipping materials are cut without a problem.
The M42-SPRINT Bi-Metal band for long life and low cost cutting.

M42 Sprint PlusM42-Sprint Plus Strong in workpieces of medium to large dimensions.
Engineered for: Non ferrous metals. Single and bundle cuts Solid material of medium to large dimensions Heavy wall tubes
Superior because: - Tooth tips made of HSS M42 - The variable tooth with a positive rake angle with a special group-set cuts solid materials as well as heavy wall structurals and tubing at fast cutting rates, with a smooth surface.

 

M42 MaximaM42-Maxima Sprint Outstanding in tough alloys and difficult materials.
Engineered for: Long chipping steels Stainless steels Titanium base alloys Special bronze Copper alloys Nickel base alloys Exotic, difficult to cut alloys
Solid material of medium sections Superior because: Tooth tips made of HSS M42 The special designed variable tooth with an extremely positive rake angle cuts aggressively in tough materials. Reduced cutting forces and easy chip formation allow accurate cuts and long life.
M42-ProfilerM42-Profiler Sprint Outstanding performance for heavy fabricators
Engineered for: Medium to large H-beams Angles and similar shapes
Superior because:Tooth tips made of HSS M42
The variable tooth with slightly positive rake angle and extra heavy group-set shows excellent performance on H-beams and similar shapes. The PROFILER-SPRINT avoids blade pinching in beams with inside tension, or in poorly supportedprofiles. For 90 degrees and miter cutting.

M42-Alacut PlusM42-Alucut Plus Easy cuts in light Metals.
Engineered for: Pure aluminum and aluminum alloys
All dimensions Superior because: Tooth tips made of HSS M42
The positive hook tooth with an extra heavy set performs at all dimensions. Smooth cuts and long tool life.

 

M-42 Alacut SprintM42-Alucut Sprint Pinch-Free through Aluminum.
Engineered for: Pure aluminum and aluminum alloys
Materials that tend to pinch Larger sections and heavy wall structurals Superior because: Tooth tips made of HSS M42
This heavy set tooth with positive rake angle avoids blade pinching and cuts larger workpieces with low vibration. ALUCUT-SPRINT for increased productivity and low cost per cut.
M42-Taifun Plus & SprintM42-Taifun Plus & Sprint Cuts excellent in special-alloys and materials of difficult machinability. Engineered for: Stainless steels Heat resistant steels Titanium alloys
Nickel based alloys
Taifun Plus Superior because: Precision borazon-ground tooth tips made of HSS M42 The hook tooth with ground triple chip geometry, positive rake angle and standard-raker-set for perfectly divided chips. Beveled roughing teeth provide excellent guidance of saw blade, Sharpest cutting edges grant fast cutting rates and great cutting accuracy.
Taifun Sprint Superior because: Precision borazon-ground tooth tips made of HSS M42
The variable tooth with ground multi-chip geometry, positive rake angle and group-set. Perfectly divided chips and excellent band guidance. Sharpest cutting edges grant reduced cutting forces and great cutting accuracy.
M51-Sprint Plus ExtraM51-Sprint Plus Extra wear resistant teeth for hard steels and alloys of medium dimension. Engineered for: Authentic stainless steels, Titanium and special bronzes.
Solid material of medium dimension, heavy wall tubing Superior because: Tooth tips made of HSS M51 The positive variable tooth with special strong tooth forms. High heat and wear resistance of HSS M51 tooth tips increase band life on all hard and problematic steels.