2 Axis CNC Mills

![]()
Overview of Atlas 2 axis CNC Vertical Mill
-Table sizes from 9" x 49" to 10" x 54"
-Spindle speeds from 60 to 4300 RPM
- Meehanite Castings
- Infinitely Variable Spindle Speeds (60-4300 rpm)
- Hardened & Ground Ways Column & Knee Way Covers
- Ground T-slots
- Hardened & Ground Table Surface / Spindle Chromed & Ground Quill Ground Ball Screws & Chromed Motor Shaft
- ABEC 7/CP4 Spindle Bearings
- Coolant System w/Pump & Switch
- Chromed Cross Feed Screw Covers and One-piece Wiper
- Flexible Coolant Nozzle
- Articulating Head / Compound Angles
- Worm gear angular positioning of head in two directions
- Handwheel fine quill feed
- Lever-operated manual rapid quill movement
- Adj. automatic feed disengagement for quill feed in both directions
- Reversing switch for clockwise or counter clockwise operation
- Spindle Brake (Hand operated)
- One-shot lubrication
- Mini Electrical Box for Coolant and Mains
- Tool Kit, Test and Accuracy Chart
| Machine Specifications | 2VSCNC | 3VSCNC | 4VSQCNC |
| Table Size (in.) | 9x49 | 10x54 | 10x54 |
| No. of T-Slots | 3 | 3 | 3 |
| T-Slot Width (in.) | 5/8 | 5/8 | 5/8 |
| T-Slot Center Distance (in.) | 2.48 | 2.48 | 2.48 |
| Table Ways | Dovetail | Dovetail | Dovetail |
| Knee Ways | Dovetail | Square | Square |
| Column Ways | Dovetail | Dovetail | Square |
| Travels | |||
| X Longitudinal (in.) | 30 | 33 | 33 |
| Y Cross (in.) | 11.5 | 15.5 | 16 |
| Knee (in.) | 16 | 17.7 | 17.7 |
| Ram (in.) | 12.2 | 20.5 | 26.75 |
| Motors & Spindle | |||
| Motor Hp. variable | 3 | 3 | 5 |
| Variable Spindle Speed rpm | |||
| Low Range | 60-500 | 60-500 | 60-500 |
| High Range | 550-4300 | 550-4300 | 550-4300 |
| Main Spindle Taper | R-8 or ISO 30 | R-8 or ISO 30 | ISO 40 |
| Spindle Travel (in.) | 5 | 5 | 5 |
| Quill Feed”/Spindle rev. | .0015/.003/.006 | .0015/.003/.006 | .0015/.003/.006 |
| Quill Diameter (in.) | 3/3/2008 | 3/3/2008 | 4/1/2008 |
| Construction | |||
| Column Turret Diameter (in.) | 14.9 | 16.33 | 16.33 |
| Knee Width (in.) | 11.8 | 14.17 | 14.75 |
| Column Bearing Length (in.) | 16.9 | 18.1 | 19.7 |
| Saddle/Table Bearing Length (in.) | 19.8 | 20.5 | 20.5 |
| Ram/Turret Bearing Length (in.) | 15-3/4 | 17-3/8 | 17-3/8 |
| Ram Length (in.) | 24-1/2 | 32-3/4 | 38-5/8 |
| Table Load Ibs. | 700 | 880 | 990 |
| Net Weight Ibs. | 2090 | 2970 | 3630 |

