Electric 3 Phase Hydraulic Press, Dura Press, Dake, 40, 70, 100 tons Models

Powerful Hydraulic Press - Double acting cylinder, ram has listing eye, heavy
steel plate frame, 2 HP and 3 HP motors (depending on model)

Dura Press - Threee Phase Electric Press
Threee phase hydraulic press
From 40 to 100 Tons Hydraulic Press

Overview Dura - Press "Three Phase"

Double acting cylinder design with 5-part oil seals for smooth operation and a tight seal.
Welded heavy steel plate frame for greater rigidity.
3 HP submerged motor drives 3 centrifugal pumps for quiet, steady oil flow (100 ton model).
All electrical controls are low voltage (24V).
Preset and factory-sealed relief valve to prevent exceeding pressure capacity.
Ram has lifting eyes that attach a chain to hydraulically move the table.
2 HP submerged motor drives two centrifugal pumps for quiet, steady oil flow (40 & 70 ton models)
Smooth, responsive control valve.
Rapid advance of the ram to the work piece - speed shifts automatically when contact is made.

model	Force 40	Force 70	Force 100
capacity (tons)	40	70	100
horsepower	2	2	3
ram speed advance	68	42	52
ram speed pressing	7	4	3
Distance between uprights	35 in	35 in	41 in
Width between table channels	8 in	8 in	10 in
Min ram to table	7 in	7-1/4 in	7-7/8 in
Max ram to table	32 in	32 in	35 in
Ram travel	19 in	19 in	19 in
Base Dim.	63x27 in	63x27 in	75x33 in
Height	88	88	90
Weight	1,210 lbs	1,595 lbs	2,950 lbs