Equipment |
Lubrication |
| Prospector
Lube Systems Accu-Lube Rustlick Lube USA |
Saw blades |
| New
Cold Saw Blades Cold Saw Sharpening Arntz Saw Blades Vendors Contact Us |
Woodworking Equipment |
Overview:
| Spindle is case hardened steel, for extra strength and wear |
| Double row taper roller and thrust ball bearings spindle support with thrust and radial axis bearings at the top |
| Rugged spindle construction for heavy drilling / boring loads with precision accuracy |
| Arm raising safety device (arm cannot drop) |
| Counter balanced mechanism for spindle return |
| 6 speeds - 3 feed rates |
| Centralized control center |
| Automatic tool ejector |
| Independent arm manual clamping system |
| Push button controls are all reduced to 110V |
| Electrical circuits isolated in the control box at the rear of the arm--sealed from dust & humidity |
| Meehanite and high tensile strength cast iron frame |
| Built-in work light |
| Coolant pump |
| Tool kit |
1-800-748-9068

Production Specialty
a dba of RGL Enterprises, Inc.
1601 North Harper Rd, Corinth, MS 38834
Tel: 662-287-6117 Fax: 662-287-1772
![]()
Home Horizontal Band Saws Cold Saws Drill Presses Vertical Band Saw Hydraulic Press Surface Grinders Lathes Vertical Mills New Cold Saw Blades Cold Saw Sharpening Prospector Lube Systems Accu-Lube Vendors Site Map Links Contact
Additional Radial Arm Drills
| CL720A/CL820A /CL920A |
| CL1100/CL1230H |
| CLC1250/CLC1600 |
| CL1600H |
| 720R |
| 1100R - 1230R |
| 1600R |
Specifications
| Boring Capacity Cast Iron | 7-3/8 inch |
| Boring Capacity Steel | 5 inch |
| Drilling Capacity Cast Iron | 2-7/8 inch |
| Drilling Capacity Mild Steel | 2-1/2 inch |
| Tapping Capacity Cast Iron | 2-3/8 inch |
| Tapping Capacity Mild Steel | 2 inch |
| Arm Travel Vertical | 50 inch |
| Column Diameter | 17 inch |
| Coolant Pump Motor | 1/8HP |
| Distance Base to Spindle (max/in.) | 63 inch |
| Distance Base to Spindle (min/in.) | 13 inch |
| Distance Column to Spindle (max/in.) | 63 inch |
| Distance Column to Spindle (min/in.) | 17 inch |
| Elevating Motor | 2HP |
| Machine Height from Floor | 124-58/64 |
| Clamping Motor | 1HP |
| Motor | 7-1/2HP, 230/460V, 3Ph, Prewired 230V |
| Number of Spindle speeds | 12 (40–1920) |
| Overall Dimensions | 116 x 55 x 112 |
| Quill Down feed Rates (IPR) | 6 (.003–.038 IPR) |
| Quill Travel | 14-9/16 inch |
| Quill Travel w/ Powerfeed engaged | 13 inch |
| Spindle Taper | 5 MT |
| T-Slots Number and Size | 3 & 7/8 |
| Table Dimensions | 27-7/8 x 19-5/8 x 15-3/4 inch |
| Base Dimensions | 97-5/8 x 41-11/32 x 8-1/4 inch |
| Travel of Head Horizontal | 49-5/8 inch |
| Weight | 11240 lb. (ship) 11000 lb (Net) |