Clausing Fabrication Center "Metal Muncher"
5 station fabrication center (mm series)
Equipment |
Lubrication |
| Prospector
Lube Systems Accu-Lube Rustlick Lube USA |
Sawblades |
| New
Cold Saw Blades Cold Saw Sharpening Arntz Saw Blades Vendors Contact Us |
5 station fabrication center (mm series)
Overview
| METAL MUNCHER features |
| Two-cylinder/two-person operation -- allowing the punch and shear end to be operated separately, independently, and simultaneously at full capacity and speed. |
| *Adjustable stroke length up to 9". |
| *Up to 3" ram size -- easily adapts to accept over-size/special tooling. |
| Easy to change punch and die holder. Die block easily removed to accept unlimited accessories. |
| Swing-away stripper gives ready access to the ram stem, and makes punch changing quick and easy. |
| Standard large throat design increases versatility by accepting special tooling/die sets. |
| *Standard large table gives user an ideal work area and accepts up to 48" brakeset and large special tooling. |
| All work stations are at approximately the same height, for ease and convenience in handling materials. |
| Press cylinder is foot pedal activated -- (Rear electric foot control for shear end available.) |
| Includes a stop button. |
| Includes complete electrics -- voltages: 220 and 440; other by request. |
| Comes complete with hydraulic oil -- ready to operate. |
| SPECIAL CAPACITY FEATURES: |
| Hy-performance blade available to increase flat bar shearing capacity. |
| Speed-up kit increases ram speed on press and shear end cylinder. |
| Adjustable tonnage control feature available. |
| *features differ on 40-ton models. |
1-800-748-9068
Production Specialty
a dba of RGL Enterprises, Inc.
1601 North Harper Rd, Corinth, MS 38834
Tel: 662-287-6117 Fax: 662-287-1772
Home Horizontal Band Saws Cold Saws Drill Presses Vertical Band Saw Surface Grinders Lathes Vertical Mills New Cold Saw Blades Cold Saw Sharpening Prospector Lube Systems Accu-Lube Vendors Site Map Links Contact
| MM Series Specifications | ||||
| MM-40 | MM-70 | MM-100 | MM-135 | |
| Throat Depth | 7" | 9"(*18") | 9"(*18") | 14"(*18") |
| Open Height | 9" | 14"(*18") | 14"(*18") | 14"(*18") |
| Stroke Length/Ram Shaft Diameter | 4 .25" / 2" | 7" / 3" (*9) | 7" / 3"(*9) | 7" / 3"(*9) |
| Strokes Per Minute ** | 40 @ ½ | 40 @ ½ | 35 @ ½ | 28 @ ½ |
| Speed-Up Kit available as option | ||||
| Platen Table | 10"D x 21"W | 11"D x 48"W | 11"D x 48"W | 11"D x 48"W |
| Work Station Height (approx.) | 34.25" | 30" | 30" | 30" |
| Punch | 40 Ton | 70 Ton | 100 Ton | 135 Ton |
| Max. Material | 7/8" - 1/2" | 1" - 7/8" | 1 3/16" - 1" | 1 11/16 - 1" |
| Max. Hole (w/special tooling) | 2" - 1/4" | 4½" - 3/16" | 5" - 1/4" | 41/2" - 3/8" |
| Plate Shear | **19" | |||
| Optional Hi-Performance Blade | 14" | 24" | 24" | 24 |
| Increases Flat Bar Shearing capacity. | 5/8" x 6" | 1" x 7" | 1" x 7" | 1" x 7" |
| ½" x 8" | ¾" x 12" | ¾" x 12" | ¾" x 12" | |
| ¼" x 13" | 3/8" x 20" | 3/8" x 20" | 3/8" x 20" | |
| ¼" x 24 " | ¼" x 24 " | ¼" x 24 " | ||
| Angle Shear | 3"x3"x5/16" | 4"x4"x3/8"std | 4"x4"x3/8"std | 4"x4"x3/8"std |
| (with optional accessory) | 6"x6"x½" | 6"x6"x½" | 6"x6"x½" | |
| Bar Shear | OPTIONAL Accessory - | |||
| 1" | Round & square blades come as standard | |||
| 1" | if ordered with machine. Total plate shearing | |||
| capacity is 16 3/8" with round & square | ||||
| blade option. See Specs - round & square | ||||
| bar shear below. | ||||
| Coper Notcher | 2 1/16" x 2 3/4" x 5/16" | 3" x 3" x 3/8" | 3" x 3" x 3/8" | 3" x 3" x 3/8" |
| Hydraulics | ||||
| Pump GPM | 4 | 7.5 | 7.5 | 7.5 |
| PSI | 4000 | 3700 | 4000 | 3500 |
| Motor STD. 230/460 | ||||
| 1800 RPM | 5 HP | 7½ HP | 7½ HP | 7½ HP |
| OPT: Phase and Voltage | 3 ph | 3 ph | 3 ph | 3 ph |
| Dimensions (Net) W-L-H (inches) | 24" x 62" x 62" | 48" x 74" x 72" | 48" x 74" x 72" | 48" x 98" x 82" |
| Weight (Net) Lbs. | 2200 | 4100 | 4800 | 7500 |
| Approximate | (*6100) | (*7100) | (*8500) | |