This is a very comprehensive collection of manual Bandsaw Machinery from 4 Manufacturers suitable for, utilty cutting short run or medium run.
Ferrous
• Non-Ferrous • Manual Saws • Relatively Inexpensive
Models
Or See Pages Focused On: |
| Manual |
| Double Column |
| Miter |
| Semi-Automatic |
| Automatic |
7" 
Kalamazoo 7AW Band Saw
| 7" Capacity Round | Triple Blade Speed |
| 3/4 HP Motor | Coolant Sys |
| 115 Voltage | 45° vise rotation |
| 300 LBS | 2 Year Warranty |
| 9" Capacity Round | Easy Blade setup |
| 2 HP Motor | Chip Brush |
| 115/220 or 208/230/460 | counter balanced head |
| 1150 LBS | 2 year warranty |
| 10"Round Capacity | Vise rotates to 45° |
| 2 HP Motor | Coolant Sys. |
| 115/220 or 208/230/460 | Easy Blade Setup |
| 704 LBS | Solid Construction |
13" 
Kalamazoo 13AW
| 13" Round | Vise rotates to 45° |
| 2 HP Motor | Coolant Sys. |
| 115/220 or 208/230/460 | Easy Blade Setup |
| 704 LBS | Solid Construction |
Equipment |
Lubrication |
| Prospector
Lube Systems Accu-Lube Rustlick Lube USA |
Sawblades |
New
Cold Saw Blades
|
7" 
Jet HVBS-7MW Bandsaw ($948.07)
Price good till 4/30/08
| 7" Capacity Round | Wheeled |
| 3/4 HP Motor | Hyd. Downfeed |
| 115 Voltage | Variable Pitch |
| 318 LBS | Adj. Material Stop |
9" 
Jet HBS-916W Bandsaw ($3,445.37)
Price good till 4/30/08
| 9" Capacity Round | Adj. Hyd Downfeed |
| 3 HP Motor | Coolant Sys |
| 115/230V | 45° swivel |
| 1150 LBS | 2 Year Warranty |
10" 
MBS-1014W 1 - 3
| 10" Capacity Round | 4 Blade Speeds |
| 2 HP Motor | Coolant Sys |
| 230/460V | 90° - 45° Head rotation |
| 1067 LBS | Fast Acting Vise |
6" 
Wilton 3400 & 3410 ($977.45)
Price good till 4/30/08
| 6" Round | Wheeled |
| 3/4 HP Motor | Coolant Sys |
| 115 Voltage | 45° vise rotation |
| 330 or 346LBS | 4 blade speeds |
8" 
Wilton 7015 Band Saw ($2,525.55)
Price good till 4/30/08
| 8" Round | Convenient controls |
| 1 1/2 HP Motor | Coolant Sys |
| 115/230 Voltage | 45° vise rotation |
| 508LBS | 4 blade speeds |
10" 
Wilton 7020 Our Low price ($3,926.00)
Price good till 4/30/08
| 10" Round | Convenient controls |
| 1 1/2 HP Motor | Coolant Sys |
| 115/230 Voltage | 3 jaw vise |
| 930 LBS | variable speeds |
10" 
Wilton 7040 ($4,650.00)
Price good till 4/30/08
| 10" Round | Convenient controls |
| 1 1/2 or 2 HP | Heavy Duty Trans. |
| 115/230V or 220/440V | 3 point vise |
| 930 LBS | variable speeds |
12" 
Wilton 7060 ($7,050.00)
Price good till 4/30/08
| 12" Round | Convenient controls |
| 3 HP | Hyd. sawhead |
| 230/440V | 3 point vise |
| 1144 LBS | variable speeds |
7" & 9" 
Dake SE712 & SE912
| 7" or 9" Round | Wheeled/Utility |
| 3/4 or 1 HP | Hyd. Controls |
| 115V | Wet or Dry Cut |
| 355 or 500 LBS | 4 speeds |
10" 
JH10W1 JH10W3 Dake
| 10" Round | Convenient controls |
| 1 1/2 or 2 HP | Heavy Duty Trans. |
| 115/230V or 220/440V | 3 point vise |
| 930 LBS | variable speeds |
8" or 10" 
KMTsaw Utility Bandsaw
| 8" or 10" Round | Wheeled |
| 1 or 2 HP | 45°L & 60°R |
| 115V or 220V | Coolant Sys |
| 500 or 600 LBS | variable speed |
| 10" or 12 Round | TEFC Motors |
| 2 or 2.5 HP | 45°L & 60°R |
| 220 or 208/440/480 | Auto-Shut Offs |
| 850 or LBS | variable speeds |
Production Special carries a very compete line of metal cutting band saws and metal cutting bandsaw equipment. We specialize in metal cutting applications. Production Specialty has band saw equipment for ferrous and non-ferrous metal cutting. Our focus is on the Industrial market, where fabrication of metal products often starts with a metal cutting saw. We supply saws from Jet, Wilton, Kalamazoo & Dake. If you don't see what you need on this page, see our "quickguide" to metal cutting band saw machinery at, horizontal band saws. You should see what you need there. Our experts can help you select the right metal cutting band saw for your application. Please contact us with your requirement. New products will be available from time to time.
1-800-748-9068
Production Specialty
a dba of RGL Enterprises, Inc.
1601 North Harper Rd, Corinth, MS 38834
Tel: 662-287-6117 Fax: 662-287-1772
Home Horizontal Band Saws Cold Saws Drill Presses Vertical Band Saw Surface Grinders Lathes Vertical Mills New Cold Saw Blades Cold Saw Sharpening Prospector Lube Systems Accu-Lube Vendors Site Map Links Contact
KMT 10"