The 100 ton deluxe edwards ironworker has it all. The 100 Ton Deluxe Ironworker is loaded with 5 workstations and 100 Ton of hydraulic power. Punching up to a 1-1/16 hole in 1 inch steel. This ironworker also includes an angle shear, flat bar shear, rod shear and a coper notcher. With the ** Powerlink System, it will also power Edwards hydraulic accessories like the 10 ton pipe & tube bender, shop press and press brake, making it the center of a fab shop. This is one powerful ironworker.
FREE SHIPPING on Edwards Ironworkers
Call us at 1-800-748-9068 and get your best quote !
Thanks for visiting
Let me answer any questions and direct you to the best ironworker for your application
for the best price.
BUY or LEASE
 |
 |
 |
100 Ton Deluxe Ironworker Specifications
Standard Motor
10 HP 3PH 208 V or 230 V 1770 RPM 26 A
Optional Motors
10 HP 3PH 460 V 1770 RPM 12 A
10 HP 3PH 575 V 1770 RPM 10 A
10 HP 1PH 230 V 1740 RPM 40 A
PowerLink
PUNCH
Rating 100 Tons (65,000 PSI Tensile)
Max. Capacity 1-1/16″ Dia. in 1″ A36
Stroke 1-15/16″
Throat Depth 11″
Open Height 8-3/4″
Shut Height 6-13/16″
Work Height 39-3/8″
FLAT BAR SHEAR
Max. Capacity 1/2″ x 18″ 3/4″ x 14″ 1″ x 10″
Max. Round 1″
Max. Square 1″
Work Height 37″
ANGLE SHEAR
Max. Capacity 6″ x 6″ x 1/2″
Work Height 43-15/16″
ROD SHEAR
Max. Round 1-1/2″
Max. Square 1-1/4″
Work Height 54-1/2″
COPER NOTCHER
Max. Capacity 3″ x 6″ x 1/2″
Work Height 42″
Hydraulic Pump 24 GPM
Valve Pressure 3800 PSI
Reservoir 17 Gallons
Cylinder 2-1/2″ Ram
DIMENSIONS
Height 63-1/8″
Width 56″
Depth 45-1/2″
Shipping Weight 5180 lb
100 Ton Deluxe Edwards Ironworker
** The “Powerlink System” allows ironworker to power accessory tooling: 10 or 20 Ton Shop Press, 10 Ton Pipe/Tube Bender, Pipe, Tube & Section Radius Roller. Powerlink System is factory installed on new ironworkers.
* Free shipping in continental US only, additional charges for Alaska & Hawaii.
we’ll do better than that
Call and get you questions answered
100 Ton Deluxe Edwards Ironworker
Standard tooling
The 100 ton deluxe edwards ironworker punch can put a 1-1/16 hole through 1 inch steel plate! Pedestal Die Table Punch – is standard for flange or web surfaces of 2″ x 2″ steel angle, channel, beam.
Flat Bar Shear On this ironworker work for up to 18″ wide x 1/2″ thick” steel. 
Angle Shear cuts both thin and thick steel angle up to a 6 x 6.
Coper Notcher – notch a piece off a plate, barstock or angle up to 1-1/2 x 6 x 1/2″
Rod Shear & Housing Shears Solid Rod up up 1-1/2″ round and 1-1/4 inch square rod[raw]