Dake SE 10M – 8.5M – 6.5M Mitering Band Saws

Ruggedly Built Mitering Band Saw- Miter Cuts up to 60 degrees right

[raw]

SE 10M Mitering Horizontal Band Saw

SE 10M Mitering Horizontal Band Saw

Features

  • Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve (except Zip 28).
  • Heavy cast head frame for rigidity and roller and carbide guides for optimum cutting quality.
  • Set blade and head descend speed according to the stock material, size and shape for maximum efficiency.
  • Direct drive without horse power loss through belts and pulleys.
  • Multimode features allow three different cutting modes:
    1. Manual mode
    2. Manual mode with hydraulic down feed regulation
    3. Automatic down feed
  • Quick set cam-activated vises.
  • Miter up to 60º to the right, and anywhere in between. The head, NOT the material, rotates for angle cutting. (Trad 301 will miter up to 45º
Model SE 10 DM SE 8.5 M SE 6.5 M
Capacity 10″ Round 8 1/2″ Round 6.5″ Round
Horsepower 2.75 1.75 2.5
Voltage 220V 3 phase 220V 3 Phase 120 V
Maximum blade speed 230 FPM 230 FPM Variable
Blade width 1″ 1″ 3/4″
Blade length 108″ 101″ 84 1/4″
Blade speed 115-230 FPM 114-230 FPM 114-262 FPM
Solid round 90˚ capacity 10″ 8 1/2″ 6.5″
Solid round 45˚ right capacity 8″ 6 3/4″ 4 1/4″
Solid round 60˚ right capacity 5″ 4 1/4″ 3″
Solid square 90˚ capacity 7 1/2″ 7 3/4″ 6 3/4″
Solid square 45˚ right capacity 7 1/2 / 6 3/4″ 6 3/4″ 4 1/2″
Solid square 60˚ right capacity 5″ 4 1/4″ 3″
Solid rectangle 90˚ capacity 10 1/2″ x 7 3/4″ 10 3/8 x 7 3/4″ 7 3/4 x 3″
Solid rectangle 45˚ right capacity 8 1/4″ x 3 1/8″ 7 3/4″ x 6 1/4″ 6 x 4 1/4″
Solid rectangle 60˚ right capacity 4 3/4″ x 5 1/4″ 4 1/2″ x 4″ 4 x 2 3/4″
Worktable height 37″ 37″ 37″
Height 74″ 71″ 65″
D x W 28″ x 66″ 33″ x 58″ 35 x 48″

 
Call me, Jason, at  1-800-748-9068  and get your best quote !
I’ll answer your questions and make an honest recommendation for the right ironworker.
I can save you some trouble and save you some dollars.
BUY or LEASE